- Home/
- Gas Turbine/
- Industrial/
- Centrax CX300 1S Gas Turbine Generator Set (CHP) – 8 MW – 50 Hz – 2025
Description
This Centrax CX300 1S is a gas turbine generator set configured for combined heat and power (CHP), rated at 8 MW at 50 Hz and fired on natural gas. It was manufactured in 2025 and is offered used, with one unit available. Expected availability is Spring 2027.
The CX300 is built around a single Siemens Energy SGT-300 gas turbine. Typical catalogue figures for the CX300 1S (ISO conditions, at generator terminals, not measured values for this unit) are about 7.9 MWe at roughly 31% electrical efficiency, with an exhaust flow of about 30 kg/s at about 536 °C. That exhaust carries roughly 25 MWth, which is what suits the set to steam, hot water or hot air recovery in cogeneration; Siemens quotes overall plant efficiency of 80% or more for SGT-300 cogeneration.
Operating hours, starts, generator details and the exact scope of supply are available on request. Where this page shows typical catalogue values they come from the manufacturer's public product information, and the unit's own documents prevail.
Specifications
| Parameter | Details |
|---|---|
| Manufacturer / Model | Centrax CX300 1S |
| Configuration | Gas turbine generator set, combined heat and power (CHP) |
| Rated Output (unit) | 8 MW |
| Frequency | 50 Hz |
| Fuel | Natural gas |
| Year of Manufacture | 2025 |
| Condition | Used |
| Operating Hours / Starts | Available on request |
| Availability | 1 unit; expected availability Spring 2027 |
| Core Engine (typical) | Siemens Energy SGT-300 single-shaft gas turbine |
| Electrical Output, CX300-1S (typical) | 7,886 kWe at ISO, generator terminals |
| Electrical Efficiency (typical) | About 31% |
| Heat Rate (typical) | About 11,658 kJ/kWh |
| Exhaust Flow / Temperature (typical) | About 30.2 kg/s at about 536 °C |
| Exhaust Heat (typical) | About 25.5 MWth available for recovery at ISO |
| Combustion / Fuel Options (typical) | Dry Low Emissions (DLE), NOx and CO under 10 ppmvd at 15% O2 on gas; liquid fuel is an option |
| Package Size (typical, Siemens SGT-300 package, indicative) | About 11.9 m x 2.7 m x 4.0 m, about 59 tonnes, excluding inlet filter house and exhaust stack |
Scope of Supply
| System | Equipment |
|---|---|
| Gas Turbine Generator Set | Centrax CX300 1S gas turbine, gearbox and generator on a common base (typical Centrax package) |
| Package Modules | Gas fuel, lube oil and auto-drain modules, optional liquid fuel module (typical) |
| Enclosure | Acoustic enclosure with walkways, access doors and safety interlocks (typical) |
| Controls & Protection | Package controls, fire and gas protection, auxiliaries (typical) |
| Heat Recovery (CHP) | Recovery boiler or other heat recovery equipment: inclusion to be confirmed on request |
| Scope Note | Typical Centrax scope shown. The exact scope of this unit is confirmed on request |
If you require any further information on this listing please contact info@reflowx.com
Technical Details
| Fuel type | Natural Gas |
|---|---|
| Model Number | CX300 1S |
| Output Power | 8 MW |
| Turbine Cycle | Cogeneration (CHP) |
| Manufacturer Name | Centrax |
| Year of Manufacturing | 2025 |
General Terms
- ReflowX and the seller retain the right to evaluate and approve offers.
- Buyers should verify quantities and conditions upon delivery.
- After successful engagement, both buyer and seller manage communication for payment terms and delivery schedule.
- All parties agree to adhere to ReflowX Terms and Conditions in transactions.
- Buyers can request value-added services such as pre-purchase inspections, Expediting & Delivery Services through ReflowX. Contact us!


