SOLAR T130 Gas Turbine – 13 MW, Dual Fuel Capability, DLE Technology - 2012

The SOLAR T130 Gas Turbine, manufactured in 2012, is a robust and versatile industrial gas turbine built for high-performance power generation, mechanical drive, and cogeneration (CHP) applications. This single-shaft, axial-flow gas turbine is engineered with a Dry Low Emissions (DLE) combustion system for compliance with global environmental standards, achieving low NOx and CO emissions while maintaining high efficiency.

Designed for primary use with natural gas, the T130 can also operate on liquid fuels such as diesel, offering exceptional fuel flexibility. The turbine delivers a nominal output of approximately 13 MW under ISO conditions and operates at 3,000 rpm (for 50 Hz grids) or 3,600 rpm (for 60 Hz). Its multi-stage axial compressor, high-temperature alloys, and fast start-up capability (within 10–15 minutes) make it ideal for both base-load and peak-load applications.

With an advanced digital control system, this turbine supports remote monitoring, operational diagnostics, and comprehensive protection features, including under/over-speed, temperature, and pressure limits. It is compatible with synchronous and asynchronous generators, delivering output voltage ranges between 400V and 13.8 kV, and maintaining a typical power factor of 0.8–0.85.

Specifications:

– Model: Solar T130
– Year of Manufacture: 2012
– Engine Type: Industrial gas turbine (single-shaft)
– Configuration: Axial flow, single-shaft design
– Rated Power Output: ~13 MW (nominal at ISO conditions)
– Fuel Type: Natural gas (primary); diesel or other liquid fuels (secondary)
– Frequency Options: 50 Hz (3000 rpm) / 60 Hz (3600 rpm)
– Voltage Output: 400V to 13.8 kV (based on generator configuration)
– Compressor: Multi-stage axial-flow compressor
– Combustion System: Dry Low Emissions (DLE) system
– Cooling System: Air-cooled or water injection (optional)
– Fuel Consumption: ~0.33–0.35 m³/kWh (natural gas at full load)
– Thermal Efficiency: Up to 38–40% in simple or cogeneration mode
– NOx Emissions: Typically <25 ppm @ 15% O₂
– CO Emissions: Typically <50 ppm
– Particulate Emissions: Typically <10 mg/Nm³
– Operating Temp. Range: -10°C to +40°C (extended range available)
– Start-up Time: ~10–15 minutes from cold start
– Power Factor: 0.8 – 0.85 (depending on generator/load)
– Control System: Advanced digital control with remote diagnostics
– Protection Features: Overspeed, underspeed, over-temp, low pressure, etc.
– Compliance: Meets EU, U.S. EPA Tier 4, and other international standards
– Condition: Available refurbished or used, subject to availability

Performance Notes:
– Designed for rapid deployment and grid synchronization
– Flexible load handling – base load and peak load capable
– High durability materials for extended life under thermal stress
– Low emissions for environmental compliance

Availability:
– Refurbished or used condition (based on current stock)
– Location: Available globally
– Delivery: Subject to confirmation and logistics coordination

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com