Full Technical Specification

LINE REACTORS

Line reactors are inductive components installed in series with AC motors and variable frequency drives (VFDs) to limit current spikes, reduce harmonics, and improve the reliability and lifespan of connected equipment.

TECHNICAL SPECIFICATIONS

Motor Power Range: 1.5 kW to 630 kW

Inductance Range: 73 mH to 0.026 mH

Rated Voltage: 220V / 380V / 400V / 415V

Frequency: 50 Hz / 60 Hz

Phase: 3-phase or single-phase

Type: Dry-type, iron-core, or air-core (depending on application)

Construction:

High-quality copper or aluminum windings

Vacuum varnish impregnated to reduce noise and improve insulation

Low-loss laminated steel core

Cooling: Natural air-cooled

Installation: Panel-mounted or floor-standing

Ambient Temperature: -25°C to +45°C

Insulation Class: Class F / H

Standards Compliance: IEC 60076, IEC 61558, IEC 60289

HARMONIC CIRCUIT FILTER REACTORS

Harmonic filter reactors are inductive devices designed to work with capacitor banks to limit and block higher-order harmonics, protecting electrical systems from power quality issues.

TECHNICAL SPECIFICATIONS

Reactive Power Range: 1.25 KVAR to 100 KVAR

Rated Voltage: 400V / 415V / 480V

Inductance: Factory-calibrated to achieve desired harmonic filtering

Detuning Factor: 7%, 14%, or custom (based on harmonic mitigation requirement)

Construction:

Iron-core with precision-wound copper or aluminum conductors

Vacuum varnished and resin encapsulated

Frequency: 50 Hz / 60 Hz

Insulation Class: F / H

Cooling: Natural air

Protection: Over-temperature protection (optional)

Mounting: Floor-standing or panel-mounted

Compliance: IEC 60076, IEC 61921

FILTER REACTORS FOR DIRECT CURRENT (DC) SMOOTHING

Filter reactors for DC circuits are specifically designed to smooth the DC output by eliminating unwanted alternating current (AC) ripple components, improving the performance and reliability of DC power systems.

TECHNICAL SPECIFICATIONS

Application:

DC smoothing reactors

DC link reactors in rectifier and inverter applications

Current Rating: Custom, based on system design

Inductance: As per system requirement

Voltage Rating: Customizable for DC bus systems

Construction:

Dry-type, iron-core, or air-core

Precision-wound copper conductors

Vacuum varnish impregnated

Cooling: Natural or forced-air cooling

Mounting: Panel or floor-mounted

Operating Temperature: -25°C to +50°C

Insulation Class: F / H

Compliance: IEC 60076, IEC 61378

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com