Industrial & Commercial UPS Systems – 1 KVA to 2000 KVA

These industrial and commercial-grade UPS systems are engineered to provide consistent, reliable backup power in critical environments. Available in capacities from 1 KVA to 2000 KVA, the systems are offered in three configurations—Online (Double Conversion) for full-time protection, Line-Interactive for moderate sensitivity loads, and Offline (Standby) for basic backup needs.

The UPS units support single-phase or three-phase operation, depending on model size, and are compatible with 220V, 380V, 400V, or 415V grids operating at 50/60 Hz. With an input power factor of ≥ 0.95, surge protection, circuit breakers, and filtering are integrated to ensure safe and stable power intake.

Output voltage is maintained within ±1% regulation and delivers a pure sine wave with power factors between 0.8 and 1.0, providing dependable power for mission-critical systems. The units support overloads of 110% for 10 minutes, 125% for 1 minute, and 150% for 10 seconds.

Battery systems include VRLA, lithium-ion, or nickel-cadmium options, with customizable backup durations from 5 to 240 minutes. Advanced battery management systems ensure longevity and reliability, featuring temperature-compensated charging and intelligent monitoring.

The UPS offers LCD or LED displays, multi-level alarms, and connectivity via RS232, RS485, USB, or optional SNMP for remote network monitoring. Mechanically, units are floor-standing or rack-mounted, with IP20/IP21 ingress protection, forced air cooling, and RAL 7035 powder-coated steel enclosures.

Specifications:

– Minimum Capacity: 1 KVA
– Maximum Capacity: 2000 KVA

– Online (Double Conversion)
– Line-Interactive
– Offline (Standby)

– Voltage Range: 220V / 380V / 400V / 415V (Single-phase or Three-phase)
– Frequency: 50 Hz / 60 Hz
– Power Factor: ≥ 0.95
– Protection: Surge protection, input filters, circuit breakers
– Connection: Terminal block / Plug (based on capacity)

– Voltage Regulation: ±1%
– Frequency (Battery Mode): 50 Hz ± 0.1 Hz
– Waveform: Pure Sine Wave
– Output Power Factor: 0.8 to 1.0

– Display: LCD / LED for alarms and system info
– Alarms: Mains failure, low battery, overload, inverter fault, bypass active
– Communication: RS232, RS485, USB, SNMP (optional)
– Remote Access: Web-based and network monitoring supported
For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com